You Searched For: Methyl+4-aminobenzoate

Supplier: VWR Chemicals

Description: Fluorescence: 238 to 282
E. coli: equivalent
Water content: < or > 13%
pH at 25 °C: 4,0 - 5,7
Salmonella: not detectable
Standard plate count: ≤1000 /g
Viscosity: 38 to 50 mps

Catalog Number: (APOSBIBE1000-5G)

Supplier: APOLLO SCIENTIFIC

Description: Polymer. Inherent viscosity 1.1-1.7 dL/g, 0.1 % (w/v) in hexafluoroisopropanol (25 °C).

UOM: 1 * 5 g

Supplier: VWR Chemicals

Description: Silicone Rotational viscosity standards are specifically formulated for use with equipment with minimal temperature control. Supplied in 600 ml 'ready to use' packs specially designed to eliminate cleaning of laboratory glassware, which is inherently difficult due to the nature of silicone.

Supplier: IKA

Description: These stirring blades can be used for aerating low viscosity media and homogenising solids in liquids.

Supplier: BURKLE

Description: Disposable sampler for the highest standard in sampling unlike conventional reusable samplers, disposable samplers do not need to be cleaned after use. Simple disposable sampler for taking samples of low viscosity media. Cleaning reusable samplers is a demanding and often complicated task with greasy toxic substances. Sometimes the task is even impossible. Cross contamination is completely eliminated. It has two opening sizes (2,5/5,5 mm) for different viscosities.

Catalog Number: (45359-1EA-F)

Supplier: SIGMA ALDRICH MICROSCOPY

Description: The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).

UOM: 1 * 1 Each

Supplier: VELP SCIENTIFIC

Description: The OHS Series overhead stirrers are the ideal solution for the most demanding applications: The powerful brushless motor and microprocessor ensure excellent performance and make the VELP OHS Series overhead stirrers unlike any conventional stirrer.

Supplier: WITEG LABORTECHNIK

Description: These high-speed overhead stirrer tools are designed for mixing applications in the laboratory specialised for low- to medium-viscosity materials.

Supplier: IKA

Description: Powerful laboratory stirrers for quantities up to 40 or 100 litres (H₂O). Units automatically adjust the speed through microprocessor-controlled technology within the speed range of 0/30 to 2000 min⁻¹ (EUROSTAR 60 models) or 0/30 to 1300 min⁻¹ (EUROSTAR 100 models). Safety circuits ensure automatic cut-off in anti-stall or overload conditions. The actual shaft and pre-set speed are constantly monitored, and variations adjusted automatically. This guarantees a constant speed even with changes in sample viscosities.

Supplier: Spectrum Chemical

Description: Carboxymethylcellulose Sodium, High Viscosity, Viscosity of 1 Percent Aqueous Solution @ 25 DEG C: 1500-3000 cP, USP is often used as a thickener and stabiliser.

Supplier: Spectrum Chemical

Description: Carboxymethylcellulose Sodium, Low Viscosity, Viscosity of 2 Percent Aqueous Solution @ 25 DEG C: 37.5 cP, USP is often used as a thickener and stabiliser. The USP grade indicates it is a grade suitable for personal care, cosmetic and pharmaceutical applications and were manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities.

Supplier: VWR Chemicals

Description: Silicone oil, 20 cSt

Certificates

Supplier: IKA

Description: TWISTER is a universal and compact mixing device with magnetic drive. In the default version, TWISTER is a powerful single-position magnetic stirrer for mixing up to 5 litres at a maximum speed of 3000 min⁻¹ and a viscosity of up to 500 mPa·s. By connecting additional TWISTER stirring units (available as accessories, IKAA20112621), TWISTER can be expanded to a multi-position magnetic stirrer with up to 30 stirring positions. The stirring positions can be controlled either separately or simultaneously (leader-follower principle).

Supplier: MP Biomedicals

Description: Carboxymethyl Cellulose Sodium Salt is a high viscosity carboxymethylcellulose (CMC); the viscosity of a 1% solution in water at 25 °C is 1300-2200 centipoise (cps). The viscosity is both concentration and temperature dependent. As the temperaure increases, the viscosity decreases. As the concentration increases, the viscosity increases.

MSDS

Supplier: IKA

Description: Extremely powerful laboratory stirrers for highly viscous applications and intensive mixing of quantities up to 100 L (H₂O). Units automatically adjust the speed through microprocessor controlled technology within the speed range of speed range of 6 to 2000 min⁻¹ or 4 to 530 min⁻¹ (P4 models), all models have two speed ranges. Safety circuits ensure automatic cut off in anti-stall or overload conditions. The actual shaft speed and preset speed are constantly monitored and variations are adjusted automatically. This guarantees a constant speed even with changes in sample viscosities.

Supplier: VWR Chemicals

Description: Silicone oil, 100 cSt 47 V 100

MSDS Certificates