You Searched For: Tube Furnaces

Supplier: NABERTHERM

Description: These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: NABERTHERM

Description: These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: NABERTHERM

Description: These compact bench top tube furnaces with integrated controllers can be widely used for a variety of processes. Equipped with a standard C 530 ceramic working tube and two fibre plugs they have an unbeatable price/performance ratio. Units feature rust-free, textured stainless steel exteriors. R models feature Tmax 1200 or 1300 °C, RD models have Tmax 1100 or 1300 °C.

Supplier: CARBOLITE

Description: The CTF single zone and TZF three-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube.

Supplier: CARBOLITE

Description: The horizontal split tube furnace range HST (single zone) and HZS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters. These furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the tube furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult.

Supplier: CARBOLITE

Description: The modular horizontal tube furnace range GHA (single zone) and GHC (3-zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility; with the use of tube adapters the same furnace can be used with a variety of tube diameters.

Supplier: CARBOLITE

Description: The vertical split tube furnace range VST (single zone) and TVS (three zone) uses free radiating wire elements embedded within the insulation of the furnace body. The benefit of this design is its flexibility with the use of tube adapters the same furnace can be used with a variety of tube diameters. These furnaces comprise a furnace body which is hinged and split into two halves along its length. This makes exchange of work tubes easier and also enables the furnace to be used with reactors or work tubes where end flanges would make insertion into a non-split furnace difficult. This design is particularly suitable for incorporation into extension test and creep test apparatus.

Catalog Number: (PTC12/20/150)

Supplier: CARBOLITE

Description: Tube Furnace, PTC 12/20/150, Maximum Temperature: 1200 °C, Heated length: 150 mm, Ø int. tube: 20 mm, Power: Max. 1100 W, W×D×H ext.: 311×229×400 mm

UOM: 1 * 1 items

Supplier: CARBOLITE

Description: Tube furnaces are used to heat a small sample that features insulation plugs, radiation shields to prevent heat loss and improve uniformity (recommended for vertical use) and impervious inner worktubes to protect against chemical attack or damage from thermal shock.