You Searched For: Indium+Gallium+alloy+(60:40+w%)


27 205  results were found

SearchResultCount:"27205"

Sort Results

List View Easy View (new)

Rate These Search Results

Supplier: Alfa Aesar
Description: Platinum iridium alloy (80:20 w%) ≥99.9% (metals basis excluding precious metals), wire, hard, Ø 0.127 mm (0.005 in)

Supplier: Priorclave
Description: Compact 40 benchtop and Compact 60 floor standing or benchtop autoclaves for the low volume user, with flexible operation usually only available in larger autoclave units. This flexibility is delivered by the TACTROL™ microprocessor control system, specially developed for laboratory autoclaves, with programming ranging from simple cycles to fully featured multi-program operation with logged records. All Priorclaves come complete with Biomaster antimicrobial coating, helping improved laboratory hygiene; it is effective against all bacteria and fungi including MRSA and therefore helps minimise the risk of cross contamination.

Supplier: VARIAN
Description: Bond Elut™ PRS is a strong cation exchange sorbent that is also relatively high in polarity. With no appreciable degree of hydrophobicity, in non-polar solvents, PRS is capable of polar and hydrogen bonding interactions. Due to the very low pKa of PRS, a high ionic strength eluent must be used, and so the use of PRS is recommended for weaker cationic species such as pyridinium compounds.

Supplier: VARIAN
Description: Native silica is generally regarded as the most polar SPE sorbent available. Bond Elut™ SI is particularly effective at separating compounds with a very similar structure. Applying the analytes in a non-polar solvent, then increasing the solvent polarity by increasing the concentration of a polar modifier, such as THF or ethyl acetate, delivers effective separations.

Catalog Number: (IMECS1C15A79100)
Supplier: IMEC MESSTECHNIK
Description: Pre-programmed. Outstanding single-use temperature logger for reliable cold chain monitoring. Integrated USB port and PDF and CSV generating software on-board.
UOM: 1 * 20 items


Supplier: Alfa Aesar
Description: Platinum rhodium alloy (70:30 w%), wire for ISA type B standard grade thermocouple, Ø 0.5 mm (0.02 in)

Catalog Number: (241-0032)
Supplier: VWR Collection
Description: Laboral aluminium alloy.
UOM: 1 * 2 items


Supplier: VARIAN
Description: Due to the methyl group and subsequent low carbon load, Bond Elut™ C1 is the least retentive of all alkyl group bonded phases for non-polar compounds. However, due to the extensive end capping of this sorbent to mask polar silanol activity, retention and elution of polar and multi-functional analytes can still be achieved. Typical applications include plasma, urine and aqueous samples.

Catalog Number: (44731.GH)
Supplier: Alfa Aesar
Description: Palladium silver alloy (75:25 w%) ≥99.9% (metals basis excluding Pt), foil, Thickness: 0.10 mm (0.004 in)
UOM: 1 * 1 items

Supplier: Merck
Description: RP-2, RP-8 and RP-18 are based on silica gel 60 modified with aliphatic hydrocarbons. The chain length, in combination with the degree of modification, defines the ability to tolerate water in the solvent system and strongly affects retention. Migration time increases in the order RP-2, RP-8 and RP-18 using the same solvent composition. RP-8 and RP-18 can be run with up to 60% water in the solvent system.

Supplier: Alfa Aesar
Description: Platinum rhodium alloy (90:10 w%) ≥99.9% (metals basis), gauze woven from wire 80 mesh, Ø 0.076 mm (0.003 in)

Catalog Number: (42366.18)
Supplier: Alfa Aesar
Description: Nickel chromium alloy (80:20 w%) ≥99.95% (metals basis), slug, Length: 6.35 mm (0.25 in), Ø 6.35 mm (0.25 in)
UOM: 1 * 50 g


Supplier: AMARELL, ARNO
Description: Dropping point thermometers according to Ubbelohde.

Supplier: VARIAN
Description: Bond Elut™ Diol (2OH) resembles unbonded silica in its tendency for strong hydrogen bonding with analytes. 2OH can also be employed in the non-polar mode because the hydrocarbon spacer on its functional group provides enough non-polar character for retention of hydrophobic analytes. Bond Elut™ Diol is a listed SPE device for the DIN 14333-1 method on benzimidazole fungicides.

Supplier: VARIAN
Description: Bond Elut™ DEA bears some resemblance to Bond Elut™ NH₂ in its properties but with a slightly lower capacity as an anion exchange sorbent. DEA has a moderately non-polar character due to the alkyl side chains on the amino functionality. These groups still afford a medium level of polarity, higher than C₈ but less polar than C₂ or CN-E.

Supplier: AMARELL, ARNO
Description: These total immersion thermometers, with enclosed scale, are suitable for government testing and official calibration.

New Product

Inquire for Price
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the call is still displayed and you need assistance, please call us on +353 1 88 22222.
This product is marked as restricted and can only be purchased by approved Shipping Accounts. If you need further assistance, email VWR Regulatory Department at eurega_services@eu.vwr.com
-Additional Documentation May be needed to purchase this item. A VWR representative will contact you if needed.
This product has been blocked by your organisation. Please contact your purchasing department for more information.
The original product is no longer available. The replacement shown is available.
This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above. If you need further assistance, please call VWR Customer Service on +353 1 88 22222.
1 137 - 1 152 of 27 205
no targeter for Bottom