You Searched For: Liquid+Process+Filters

Supplier: Hichrom Limited

Description: These filters are made from 100% PEEK.

Supplier: Hichrom Limited

Description: These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Hichrom Limited

Description: The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Catalog Number: (590-0201)

Supplier: Bohlender

Description: Filter candle made of porous PE.

UOM: 1 * 10 items

Catalog Number: (ROBU80052)

Supplier: ROBU GLASFILTER

Description: This solvent filter is made of pure borosilicate glass.

UOM: 1 * 1 items

Catalog Number: (590-0221)

Supplier: Bohlender

Description: Suction Filter with PTFE membrane.

UOM: 1 * 5 items

Supplier: ROBU GLASFILTER

Description: These filters are suitable for degassing and filtration of solvents e.g. in chromatography.

Supplier: Bohlender

Description: These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Supplier: Avantor

Description: J.T.Baker Robotic tips type TE MCA are compatible with the Tecan Freedom EVO and the Tecan Fluent liquid handler using the MCA 96 head. Tips are manufactured under automated processes to reduce human contact and ensure precise reproducibility and exceptional quality.

Supplier: Merck

Description: The EZ-Fit™ Filtration unit is a disposable filtration device for bioburden testing of liquid samples including water, in-process samples, and final products.

Catalog Number: (41397-100MG)

Supplier: Merck

Description: Tebutam CRM may also be used as given below:
Optimisation of sample extraction based on QuEChERS and dispersive-solid-phase extraction (d-SPE) clean-up for the multi-residue analysis of 120 pesticides 16 polycyclic aromatic hydrocarbons and 22 polychlorinated biphenyls by liquid and gas chromatography coupled with tandem mass spectrometry (MS/MS)
Evaluation of 250 pesticide residues extracted by QuEChERS method from 103 processed fruit samples using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS)
Determination of 90 pesticides 16 polycyclic aromatic hydrocarbons and 22 polychlorinated biphenyls in honey samples by using QuEChERS combined with dispersive solid-phase extraction (SPME) for sample pre-treatment and liquid chromatography-triple-quadrupole tandem mass spectrometry and gas chromatography-ion-trap tandem mass spectrometry for quantitation
Screening and quantification of 569 pesticides in honeysuckle samples by a combination of ultrahigh-performance liquid chromatography (UHPLC) and quadrupole-Orbitrap high-resolution mass spectrometry
Simultaneous determination of 134 pesticide residues in tea samples using d-SPE extraction with a multi-functional filter (MFF) followed by ultra-high performance liquid chromatography (UPLC) and quadrupole time-of-flight mass spectrometry (TOF-MS).

UOM: 1 * 100 mg

Supplier: Pall Laboratory

Description: Disc filter holders recommended for filtration of products such as aggressive chemicals, laboratory solvents, cell culture media, ophthalmic, pharmaceuticals, vitamins, process water, antibiotics and photo-resists (gases and liquids).

Catalog Number: (JOURJR-S-20004)

Supplier: VICI JOUR RESEARCH

Description: This safety air outlet filter regulates the pressure during helium sparging.

UOM: 1 * 1 items

Supplier: Agilent

Description: It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Catalog Number: (MICS58846-05)

Supplier: MICROSOLV

Description: Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.

UOM: 1 * 1 items

Supplier: IDEX RHEODYNE

Description: Inlet filters are used to extract particles from the sample between the injector and the column.