You Searched For: Vacuum+Ovens

Supplier: LIOFILCHEM

Description: Two-sided slide with agar-agar centre. Operating instructions: 1. Unscrew the cap containing the agar-agar slide. Hold the bottle in the other hand and lightly apply pressure to the sampling area using the agar-agar slide; or 2. Apply directly to the middle of the swab brush if you have completed a swab sample; or 3. Immerse the agar-agar slide in the liquid to analyse. 4. Insert the slide into the bottle and screw back on. Place in the oven at 37 °C for 24/48 hours. To detect yeasts, increase the incubation by 24/48 hours at 25/30 °C.

Supplier: Binder

Description: Shelves, Stainless steel shelf, for heavy loads, max load 70 kg, For: BF/FD/FED 260

Catalog Number: (EBRO1340-6630)

Supplier: EBRO

Description: The EBI 12-T421 is a precise temperature data logger for process validation in laboratories and the pharmaceutical industry. It enables precise temperature measurements in critical applications such as sterilisation, disinfection and ovens.

UOM: 1 * 1 items

Supplier: MEMMERT

Description: Flush-fit unit(stainless steel frame covering gap between oven and wall opening), with air slots

Supplier: VWR Collection

Description: The VWR® vacuum aspiration system is designed for laboratory waste recovery and the separation of liquids and solids.

Supplier: EBRO

Description: The EBI 12–T240 is a precise temperature data logger for process validation in laboratories and the pharmaceutical industry. With a temperature range of –200 to +200 °C and an accuracy of up to 0,05 °C, it enables precise temperature measurements in critical applications such as sterilisation, disinfection and ovens.

Supplier: Cole-Parmer

Description: Hybridisation Oven

Supplier: BOEKEL SCIENTIFIC

Description: Hybridisation Oven

Supplier: VWR Chemicals

Description: This product adsorbs water vapour, so maintaining a dry environment for your products. When the gel's adsorption capacity is exhausted the colour changes from orange to colourless. The product can be regenerated back to an orange colour by heating in a drying oven at 120 to 140 °C for approximately 3 hours and then re-used. It is suitable for numerous drying applications, although it is not recommended for strongly acidic or strongly alkaline compounds.

Certificates

Catalog Number: (GENLOV/125/CLAD)

Supplier: GENLAB

Description: A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

UOM: 1 * 1 items

Supplier: Avantor

Description: Vacuum gauge/controller assembly, J.T.Baker®

Certificates

Supplier: VWR Collection

Description: Vacuum aspiration system, VWR®, 2 L vacuum bottle

Supplier: Heraeus

Description: Accessories for laboratory ovens, fresh-air with explosion protected chambers

Catalog Number: (466-2310)

Supplier: Heraeus

Description: This forced-air circulation oven is ideal for high quality materials testing. For exacting heat processes up to 500 °C.

UOM: 1 * 1 items

Catalog Number: (181-0310)

Supplier: VWR Collection

Description: The VP 220 is ideal for rotary evaporators providing the powerful vacuum needed for demanding evaporations without the use of oil pumps. VP 220 has built-in Advanced Vapour Management (AVM) which means precise control capability for the distillation of organic solvents and applications handling aggressive vapours and gases. The VP 220 is especially effective for rotary evaporation of low boiling point solvents such as acetone and ethanol and is able to rapidly strip DMF at 35 °C. The pump parts are all made of corrosion resistant materials such as PTFE and Kalrez to handle aggressive vapours, and together with vacuum adjustment, the evaporation process will be optimised. Use the vacuum adjustment to increase the vacuum until bubbles form in the evaporation flask - then lower it slightly. Reduce the vacuum for fast reaction to bumping or foaming.

UOM: 1 * 1 items

Supplier: BOEKEL SCIENTIFIC

Description: Hybridisation and wash methods vary according to application and personal choice. Boekel Scientific offers a range of hybridisation incubators with features that include digital display for ease and reproducibility of temperature setting; microprocessor or proportional temperature control; rapid heat-up, optimised heater power and natural or forced air convection.