You Searched For: Water+Baths,+Stirred

Supplier: VWR Collection

Description: Stainless steel baths with user friendly MX temperature controller with three control buttons and on-screen prompts.

Supplier: VWR Collection

Description: Transparent polycarbonate baths keep samples visible, units feature user friendly MX temperature controller with three control buttons and on-screen prompts.

Catalog Number: (442-0814)

Supplier: 2MAG

Description: Stainless steel mixBATH, durable, robust, is suitable for MIXdrive 6/15/60 as well as MIXdrive 1/1 eco/1 XS, fitting for immersion thermostats (heating/cooling), stirring point mark inside the bath, left-/right stop for optimised thermostat positioning (circulation pump) for use with MIXdrive 6 resp. MIXdrive 15.

UOM: 1 * 1 items

Supplier: VWR Collection

Description: These thermometers fit into flasks, cuvettes, test tubes and beakers for temperature readings in food, gases, samples, reagents, water baths, ovens, incubators and semi-solids. The long stem allows user to make measurements while stirring solutions in deep vessels. Stainless steel probe (Ø: 3,5 mm).

Supplier: NICKEL ELECTRO

Description: General purpose stirred water baths offering good temperature stability and uniformity for consistent, repeatable results. Operation below ambient is possible using an optional refrigerated dip cooler.

Supplier: IKA

Description: Cylindrical stainless steel bath with heating elements underneath bath vessel. Low viscosity oil 50 cP (mPa.s) or water can be used as the heat transfer fluid. Bath has stirring speed range of 150 to 800 min⁻¹ and the internal tank dimensions are 200×160 mm (Ø×H).

Supplier: 2MAG

Description: The hermetically sealed stainless steel housing is water, germ and dust-proof. Operating temperatures for basic version up to 50 °C, for high temperature (HT) version up to 95 °C submerged in water baths, up to 200 °C in ovens.

Supplier: 2MAG

Description: The hermetically sealed stainless steel housing is water, germ and dust-proof. Operating temperatures for the basic version up to 50 °C, for HT version up to 95 °C submerged in water baths, up to 200 °C in ovens. M4 thread is integrated in the stainless steel bottom plate (only for MIXdrive 1 XS basic version).

Supplier: GRANT INSTRUMENTS

Description: The Grant Optima™ range consists of both general purpose and advanced performance thermostats combined with premium stainless steel baths (drain tap on 12, 18, 26 and 38 litre baths). Stirred circulation within the bath ensures excellent temperature stability and uniformity. Units can also be used with accessory C1G and C2G immersion coolers for operation below ambient temperatures.

Catalog Number: (VELPSA30400209)

Supplier: VELP SCIENTIFIC

Description: The procedure for determining dietary fibre exposes the sample to a series of enzymatic digestions that simulate the real digestive process which takes place in the human or animal digestive tract, calculating the undigested residue remaining at the end of the analysis. Generally dietary fibre analysis is carried out on foods intended for human consumption whereas raw fibre analysis is carried out on animal feeds or on raw materials of vegetable origin, eg. cereals. The GDE performs enzymatic digestion, a delicate phase where samples are immersed in a thermostatic water bath and stirred. Continuous and constant sample mixing is necessary in order to prevent the sample from overheating. The unit consists of an immersion thermostat, a transparent polycarbonate tank and a VELP 6-place magnetic stirrer to ensure excellent thermoregulation and precision. The use of deionised water is recommended as it eliminates any possible cause of limescale.

UOM: 1 * 1 items

Supplier: NICKEL ELECTRO

Description: Stainless steel flat lids.

Catalog Number: (DC1-300)

Supplier: NICKEL ELECTRO

Description: Immersion cooler without temperature control designed to be used in conjunction with Clifton NE4 stirred or circulating water baths, the unit runs continuously with the bath providing the temperature control. The immersion coil fits into the rear access hole behind the thermostirrer without loss of working area.

UOM: 1 * 1 items

Supplier: THERMO H + P LABORTECHNIK

Description: Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%; 50%; 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: VWR Collection

Description: The housing and tank are constructed from high-quality SUS 304 stainless steel, providing durability and longevity. Equipped with user-friendly interface display which offers intuitive function selection and real-time parameter setting. Units also feature intelligent detection on startup, promptly alerting users to any potential issues via buzzer and alarm. Additionally, they continuously monitor the power supply voltage in real-time to ensure optimal operating conditions. The automatic heating stirring function ensures uniform liquid temperature throughout the tank. The anti-leakage tray prevents damage to electrical components and avoids the risk of hazard in case of leakage.

New Product

Supplier: THERMO H + P LABORTECHNIK

Description: Compact magnetic stirrers with VARIOMAG drive, hermetically sealed in resistant stainless steel housing (except MINI units which are plastic), making these stirrers ideal for use directly in water baths. MINI stirrers are ideal for integration in analytical instruments, cuvette holders or photometers due to their size, however these plastic units are not designed for use directly in baths. There are units with up to 60 stirring positions in this range, and a choice of three external control units. The TELEMODUL 7 has one power setting, the TELEMODUL 20 C has four power settings: 25%, 50%, 75% and 100% and can store three programmes, the TELEMODUL 40 C features ten different power settings from 10 to 100% and a RS232 interface.

Supplier: VWR Collection

Description: VWR®