You Searched For: Furnaces+(Ashing+and+Muffle+Ovens)

Supplier: MEMMERT

Description: The range includes forced convection models with a temperature range up to 300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: GENLAB

Description: A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

Supplier: MEMMERT

Description: May affect the temperature distribution in the chamber.

Supplier: MEMMERT

Description: Perforated stainless steel shelf, For: UF75

Supplier: Binder

Description: Calibration certificate, pressure. Calibration of the pressure display to a specified value, including certificate , For: VD

Supplier: LTE SCIENTIFIC

Description: Oven, Large Capacity, Swallow™ 480, Capacity: 480 L, Convection type: Forced convection, Temperature range: 40…250 °C, Temperature fluctuation (time): ±0,2 °C, Temperature variation (spatial): ±4,0 °C, Max. load per shelf: ~15-20 kg, Shelves supplied (max.): 3 (19), Int. W×D×H: 720×670×1000 mm, Ext. W×D×H: 870×865×1270 mm

Supplier: CARBOLITE

Description: The HTMA series is a range of modified atmosphere high temperature ovens for use with inert atmospheres up to 700 °C.

Supplier: MEMMERT

Description: Entry port, clear, Ø 23 mm, for introducing connections at the side, gas tight, can be closed by flap and silicone stopper, in special positions-rear, For: UN55PA

Supplier: CARBOLITE

Description: Oven, PF 30, Capacity: 28 L, Convection type: Forced convection, Temperature range: Ambient +10…300 °C, Temperature fluctuation (time): ±0,2 °C (PID control), Temperature variation (spatial): ±5,0 °C @ 300 °C, Max. load per shelf: 10/20 kg, Shelves supplied (max.): 2 (3), Int. W×D×H: 290×320×300 mm, Ext. W×D×H: 665×470×470 mm, Weight: 30 kg

Supplier: Binder

Description: Inner chamber, reinforced, For: ED 720

Supplier: MEMMERT

Description: Interior nearly gastight

Supplier: Heraeus

Description: The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: Binder

Description: With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: MEMMERT

Description: Subframe, on castors (size 30 - 75: height 660 mm and size 110 - 450: height 560 mm), For: UN30PA

Supplier: CARBOLITE

Description: Ovens have a stainless steel inner chamber which is resistant to chemical attack and a corrosion resistant mild steel exterior, with a stoved epoxy/polyester coating that is easy to clean and scratch resistant. All units have multi position shelving for convenient loading/unloading. Low thermal mass insulation materials are used throughout in order to achieve rapid heating and to allow efficient energy utilisation. The high performance fan ensures optimum temperature uniformity throughout the work chamber.

Supplier: Heraeus

Description: base frame