You Searched For: Standard+Ovens

Catalog Number: (GENLOV/125/CLAD)

Supplier: GENLAB

Description: A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

UOM: 1 * 1 items

Supplier: CARBOLITE

Description: The Apex AX range of 250 °C laboratory ovens comprises three bench-top sized models equipped with the R38 digital PID temperature controller.

Supplier: THERMO BRANDED

Description: Heratherm™ large capacity ovens were designed for larger samples or high sample volume. All models have a large, easy to view, vacuum fluorescence display and simple to use touch button operation which is controlled by a microprocessor and automatic over-temperature alarm system to protect samples. All units are available in convenient 230 V version - no special connection required.

Supplier: LTE SCIENTIFIC

Description: Large capacity ovens, Swallow™

Catalog Number: (466-0317)

Supplier: GENLAB

Description: Genlab Premier ovens (PRO) are a range of efficient, reliable, cost effective units to suit the majority of drying, warming and general laboratory applications.

UOM: 1 * 1 items

Supplier: Binder

Description: Accessories for vacuum drying chambers, VD and VDL series

Supplier: THERMO BRANDED

Description: Heating and drying ovens with coated or stainless steel exterior (SS models). The timer allows the oven to be turned on or off after a pre-set time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and offer superior temperature uniformity.

Supplier: Heraeus

Description: The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: Honeywell Chemicals

Description: Broad product range for volumetric and coulometric Karl Fischer applications, as well as the indirect oven application.

MSDS

Supplier: Binder

Description: With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: LTE SCIENTIFIC

Description: Range of ovens with choice of either natural convection or forced convection by means of a fan. U (Uni-program) models offer single temperature selection/control at the push of a button. Following a mains power failure, the controller will automatically re-start. M (Multi-program) models will allow up to eight multiple-step cycles to be stored in the memory. Selectable temperature ramping function allows controlled temperature rates to be programmed into a cycle, repeated for a specified number of times or held continuously until interrupted. Following a mains power failure, recovery options include cycle hold, start cycle from the beginning or re start cycle from point of interruption.

Supplier: LTE SCIENTIFIC

Description: Factory fitted options for ovens, OP series

Supplier: GENLAB

Description: A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

Catalog Number: (466-3249)

Supplier: Binder

Description: Universal drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable TWB class 2 safety device with visual alarm and adjustable ventilation by means of ventilation slide and 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change.

UOM: 1 * 1 items

Supplier: Binder

Description: With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

Description: With forced convection and enhanced timer functions, the Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ preheating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.