You Searched For: Ovens

Catalog Number: (731-0502)

Supplier: BOEKEL SCIENTIFIC

Description: The Shake ‘N’ Bake hybridisation oven is ideal for hybridising and pre hybridising membranes used in Southern and Northern blotting techniques. The gentle rocking motion provides washes that are less messy than a shaking water bath and more convenient than a shaker inside a conventional incubator. The small footprint conserves valuable bench space.

UOM: 1 * 1 items

Supplier: GENLAB

Description: Reliable, efficient, general purpose ovens, to suit most drying, warming and general laboratory applications. These units from Genlab have a sheet steel exterior finished with an easy to clean powder coated paint. The interior chamber is made from mild steel coated with aluminium (CLAD). They are heated via Incoloy sheathed elements fitted around the fan on the rear of the chamber. ovens have fixed shelf runners and removable chrome plated wire grid shelves. The top vent is fitted with a clip to hold a glass immersion thermometer.

Catalog Number: (GENLOV/125/CLAD)

Supplier: GENLAB

Description: A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

UOM: 1 * 1 items

Catalog Number: (GENLLCO/30V/PDIG)

Supplier: GENLAB

Description: These large capacity multi-purpose ovens offer a unique range of highly efficient,
reliable and accurate units suitable for much larger applications in drying, curing, general
laboratory and industrial uses.

UOM: 1 * 1 items

Supplier: GENLAB

Description: These Genlab drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. Made from sheet steel finished in an easy to clean powder coated paint. Fitted with adjustable shelf runners, removable plated wire grid shelves and ventilation holes. Insulated models (IWC) give energy savings of over 30% compared to the non-insulated range (DC). Heated by Incoloy sheathed elements in the base of the unit. The 500 and 1000 litre models have fan assistance as standard. All units have toughened glass doors; 125 and 250 litre models have sliding doors and the 500 and 1000 litre models have hinged doors. Units are controlled via a direct reading thermostat with calibrated scale and tamper-proof lock. The units also have an illuminated mains switch with heat indicator.

Catalog Number: (466-0317)

Supplier: GENLAB

Description: Genlab Premier ovens (PRO) are a range of efficient, reliable, cost effective units to suit the majority of drying, warming and general laboratory applications.

UOM: 1 * 1 items

Supplier: GENLAB

Description: A range of efficient, reliable, cost effective ovens ideal for most drying, warming and general laboratory applications. The exterior is sheet steel finished in an easy-to-clean powder coated paint and the inner chamber is made from mild steel coated with aluminium (CLAD). The top vent is fitted with a clip to hold a mercury-in-glass thermometer. Heated by means of Incoloy sheathed elements; positioned below the chamber floor for natural convection units and fitted around the fan on the back or side wall of the chamber for mechanical convection units. The control system comprises of a direct reading thermostat and over-temperature thermostat both with calibrated scales and tamper-proof locks. They also include an illuminated mains switch with heat and overheat indicators.

Supplier: GENLAB

Description: These Genlab E3 drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. All models in this range are fully insulated for improved efficiency and energy savings.

Supplier: CARBOLITE

Description: Tube furnaces are used to heat a small sample that features insulation plugs, radiation shields to prevent heat loss and improve uniformity (recommended for vertical use) and impervious inner worktubes to protect against chemical attack or damage from thermal shock.

Supplier: LTE SCIENTIFIC

Description: Floor standing drying cabinets made of rust proofed steel, finished in textured epoxy with four adjustable reinforced chromium plated shelves. The sheathed heating elements, situated below a perforated base plate are vented either by natural convection or, for more rapid drying, via a top mounted extraction system, temperature control is by means of an energy regulator.

Supplier: CARBOLITE

Description: The CTF single zone and TZF three-zone wire wound tube furnaces use a wire element that is wound directly onto a fixed diameter integral ceramic work tube.

Supplier: CARBOLITE

Description: Ovens have a stainless steel inner chamber which is resistant to chemical attack and a corrosion resistant mild steel exterior, with a stoved epoxy/polyester coating that is easy to clean and scratch resistant. All units have multi position shelving for convenient loading/unloading. Low thermal mass insulation materials are used throughout in order to achieve rapid heating and to allow efficient energy utilisation. The high performance fan ensures optimum temperature uniformity throughout the work chamber.

Supplier: CARBOLITE

Description: The Apex AX range of 250 °C laboratory ovens comprises three bench-top sized models equipped with the R38 digital PID temperature controller.

Supplier: CARBOLITE

Description: The ELF furnaces are ideal for light heat treatment applications and for educational purposes, they are not suitable for ashing or heavy industrial duties; please see details on the AAF and CWF ranges respectively. Digital PID temperature controller (type 301) ensures precise and repeatable temperatures with push button temperature setting, adjustable heating rate and a process timer.

Catalog Number: (466-0080)

Supplier: LTE SCIENTIFIC

Description: This drying cabinet has a fine filter on the input side of the fan heater system, so washed equipment is not soiled by 'dirty' air entering the cabinet. A hydraulic thermostat allows control of the air temperature from 5 °C above ambient to 65 °C and permits controlled drying of heat sensitive substances including plastics. The front panel is fitted with a mains on / off switch, neon lamps to indicate 'mains on' and 'heaters on' and a temperature control knob.

UOM: 1 * 1 items

Supplier: LEEC LTD

Description: Drying cabinets are ideal for drying laboratory glassware, surgical instruments, theatrical wigs or media and can also be used for warming or simply for storage. These cabinets are rust resistant and finished in white powder coated paint with heatproof toughened glass doors and wire mesh shelves. The standard natural convection drying cabinets are supplied with a sliding stainless steel shutter on top for ventilation. The sliding door models LS and SS are wall mountable. Suitable for drying laboratory glassware, surgical instruments, theatrical wigs / costumes and media.